Back to all reports

Damaged road surface

Reported via iOS in the Road surface issue category anonymously at 08:39, Wed 1 May 2019

Sent to Lincolnshire County Council less than a minute later. Council ref: 350675.

The length of carriageway from the roundabout to beyond the zebra crossing to the entrance to the community centre is dangerous. It is full of raised ironworks presenting a hazzard to cyclists and cars as they have to avoid them by going on the wrong side of the carriageway. The road surface is crumbling away and due to the loose nature, creates a harzzard for cars to slow down effectively in lieu of a person using the crossing. There are a number of potholes in the same stretch causing further hazards.

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Thank you for reporting a fault on the highway. We will use the information you have provided to assess and prioritise this fault in accordance with our response times for fault reports which is available at https://www.lincolnshire.gov.uk/ highways-faults
    We will contact you again when an update is available.

    Posted by Lincolnshire County Council at 08:40, Wed 1 May 2019

  • This report has been assessed and a job for repair has been raised. We will contact you again when a further update is available.

    State changed to: In progress

    Posted by Lincolnshire County Council at 10:35, Fri 3 May 2019

  • We have instructed our Alliance Partners to make a repair. We will contact you again when a further update is available.

    State changed to: Action scheduled

    Posted by Lincolnshire County Council at 09:34, Tue 7 May 2019

  • State changed to: In progress

    Updated by Lincolnshire County Council at 09:36, Thu 16 May 2019

  • All necessary work has now been carried out and no further action is planned. Thank you for reporting a fault to Lincolnshire County Council.

    State changed to: Fixed

    Posted by Lincolnshire County Council at 09:36, Thu 16 May 2019

This report is now closed to updates. You can make a new report in the same location.