Investigating
200m and 100m signs reversed on northbound approach to burton waters on a57
Reported via mobile in the Sign (unlit) category anonymously at 21:02, Sat 18 September 2021
Sent to Lincolnshire County Council less than a minute later. Council ref: 405446.
Travelling from Lincoln to Burton waters on the a57, the 200m and 100m signs before the roundabout have been turned around and cannot be seen by drivers.
Updates
-
Thank you for your report. We will investigate and make an update to this report within 14 days.
Posted by Lincolnshire County Council at 21:02, Sat 18 September 2021
-
We need to investigate this report. We will contact you again when an update is available.
State changed to: Investigating
Posted by Lincolnshire County Council at 08:12, Mon 20 September 2021
-
What is there to investigate ? It is now 69 days later in the last week in November, and the 200 yd and 100 yd signs are still facing in the wrong direction of travel. How much planning is required to twist the signs on the pole back into their correct position and tighten the large jubilee clip to stop it happening again
Posted anonymously at 20:52, Thu 25 November 2021
-
These signs are still facing the wrong way round and are now lit by car headlights travelling in the opposite direction. They were spun round by contractors leaning on them during the recent road re-surfacing. We watched them whilst stuck in the roadworks traffic back in September
Posted by Alan Arnold at 16:37, Mon 6 December 2021
-
This issue was reported 3 months ago and has still not been dealt with. Surely it is something that a man with a van, with flashing warning lights, a couple of cones and a spanner should be able to remedy in ten minutes. What is taking so long?
Posted anonymously at 16:15, Sat 18 December 2021
-
Situation remains the same as above which explains why vehicles racing from Lincoln to Burton Waters roundabout a breaking very hard to avoid vehicles coming out of Burton Waters. An accident waiting to happen. The countdown markers are there just need a simple swivel round. I say again an accident waiting to happen. This is a ten minute job.
Posted anonymously at 14:53, Mon 17 January 2022
Provide an update
Your information will only be used in accordance with our privacy policy